Biltwell Solo Seat 2

(1 review) Write a Review
  • 1/8" (3mm) thick, stamped steel pan with welded carriage bolts on nose and tail for spring and hinge mounting
  • Stamped-in ridges on the pan increase stiffness and give the pan a clean, classic look with a matte black electroplated finish
  • Covers are hand-stitched, heavy-duty black vinyl
  • Foam is molded polyurethane, approximately 1” thick
  • Compared to the original Solo seat, the new Solo 2 has a shorter overall length and two more inches of kick in the tail to deepen the seating area and improve its visual flow on bikes with steep backbones
  • Seats measure 13" L x 11.5" W

*Don't forget to order a matching Biltwell Harlot Pillion Seat to complete the look*

**Does not fit GT or B5 model**

Installation instructions available here

1 Review Hide Reviews Show Reviews

  • 4
    Great seat but tough installation.

    Posted by Dave on 23rd Nov 2015

    This seat is very well built! Much better than the OEM seat. Not as padded as the OEM but I had no discomfort on an 84 mile trip. Looks great! So this seat is a 5-star. The installation is a 2-star. The aft bolt pattern for the OEM seat is aprox 8.25". The corresponding bolt pattern for the Solo Seat 2 is aprox 7". I couldnt use the OEM centering washers so I had to "adjust" the mounting location of the springs with fender wahsers that alloed me to install the springs off-center to match the 8.25" dimension. Also, you will have to remove the forward stud on the seat yourself.